Welcome to Würth Ireland & Northern Ireland For trade customers only

TRADE CUSTOMERS

CLICK & COLLECT

FAST DELIVERY

CUSTOMER SERVICE +35361430200

OVER 43,000 PRODUCTS

Thread-rolling screw with countersunk head with milling pockets
Thread-rolling screw with countersunk head with milling pockets - 1
Thread-rolling screw with countersunk head with milling pockets - 2
Thread-rolling screw with countersunk head with milling pockets - 3
Thread-rolling screw with countersunk head with milling pockets - 4
Thread-rolling screw with countersunk head with milling pockets - 5

For detailed information, other images and documents, please select individual articles from the following table.

Thread-rolling screw with countersunk head with milling pockets

Wood on metal substructures. DIN 7500-1, countersunk head with milling pockets, case-hardened steel (-O-), zinc flake silver, TXplus

See product details

Available in 2 versions

Prices for customers after login

Show availability in Würth trade store
Exclusively for trade customers

Register now and access more than 43,000 products

Variants

Exclusively for trade customers

Register now and access more than 43,000 products

Call customer service: +353 61 430200

Prices for customers after login

  • Thread-rolling screw with countersunk head with milling pockets for securing floor panels to steel substructures

  • Surface: Cr(VI)-free, zinc-flake silver coating

  • Corrosion protection: approx. 700 hours with no base metal corrosion DIN EN ISO 9227-NSS


Thread-rolling screws form a nut thread in cast blind holes, rim holes and drilled, lasered and punched sheet metal parts. Unlike thread cutting, thread-rolling does not interrupt the material structure in the receiving thread. Instead, the material is displaced and strain-hardened.

Notice

The thread-rolling tip is not suitable for mounting. Thread-rolling tip length is 5xP (P = thread pitch, at diameter M6 P = 1 mm and at diameter M8 P = 1.25 mm).