Vehicle battery charger WBC-15
Vehicle battery charger WBC 12/24 V – 15/10 A
CHRG-BTRY-VEH-(WBC-15)-15/10A-12/24V
Register now and access more than 43,000 products
Flexible application depending on the situation
- Selection of different charging modes - 12 V/24 V/supply/de-sulphation/cold
- Selection of different battery types - wet/AGM/EFB (start/stop)/lithium
Intelligent microprocessor charging technology
- Charges up to 3 times faster than conventional devices
- Charges deeply discharged batteries as low as 0.5 V residual voltage
Maximum safety
- Protection against overcharging, reverse polarity, voltage spikes, etc.
- Best temperature monitoring by means of sensor and ventilation system
- Charging stops automatically if risks are detected
Datasheets(X)
1. Red terminal on + pole, then black terminal on vehicle ground or - pole
2. Connect power cable to 230 V socket
3. First select charging mode, then battery type
4. Press the mode button for 3 seconds to interrupt or stop the charge
Min./max. input voltage | 240-220 V |
Frequency | 50 Hz |
Charging voltage max. at 12 V | 15.8 V |
Charging voltage max. at 24 V | 29.8 V |
Charging current at 12 V | 15 A |
Charging current at 24 V | 10 A |
Min./max. rechargeable battery/battery capacity | 40-230 Ah |
Power rating | 298 W |
Battery designation | 12 V lead-acid batteries (open and maintenance-free, MF, calcium, VRLA, GEL, AGM fleece) |
Charging characteristics | 8-step |
IP protection class | IP 20 |
Cable length | 150 cm |
Fully insulated charging terminals | Yes |
Length (battery charging cable with terminals) | 258 cm |
Cable cross section | 6 mm² |
Length x width x height | 206 x 153 x 69 mm |
Product weight (per item) | 1.700 kg |
Colour | Black grey |
Spark protection | Yes |
Reverse-polarity protection | Yes |
Approval mark | CE |