Welcome to Würth Ireland & Northern Ireland For trade customers only

TRADE CUSTOMERS

CLICK & COLLECT

FAST DELIVERY

CUSTOMER SERVICE +35361430255

OVER 20,000 PRODUCTS

Underseal

Underseal
UBS-PERMANENT-SPRAYABLE-BLACK-1000ML

Art.-no. 0892072

Prices for customers after login

Underseal

Art.-no. 0892072

Prices for customers after login

Quantity

PU

Exclusively for trade customers

Register now and access more than 15,000 products

Bitumen-based coating compound containing solvents, cannot be painted over
  • With long-term protection and anti-humming effect

  • Resistant to splash water and salt water, weak acids and bases

  • Quick drying

  • No dripping off vertical or upright surfaces

  • Excellent adhesion
Notice

Do not spray on joints, engines, gears and brake systems. After use, turn the can upside down and spray until the valve is empty.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue(X)

Catalogue page as PDF 1

Datasheets(X)

Safety data sheet 1

Application area

For repairing and protecting concealed areas that do not need to be painted. Ideal for preventing humming noises in external applications such as wheel housings, underbody seals, etc.

Instructions

Shake can well before use. The surface must be dry and free from rust, dirt or grease. Optimum spraying distance is 30 cm. Allow the product to dry between coatings in case of thicker coatings. Working pressure: 3–6 bar.

Chemical basis

Bitumen

Surface pre-treatment required

Dry, dust and grease-free

Contents

1000 ml

Weight of content

1090 g

Smell/fragrance

Characteristic

Colour

Black

Min. proportion of solids

66 %

Conditions for thorough drying

At 20°C, 400 μ wet

Min. spraying distance

20 cm

Conditions for skin-formation time

at 20°C

Min. skin-formation time

75 min

Drying time

2.5 h

Conditions for drying time

at 20°C

Density

1.09 kg/m³

Ignition temperature

200 °C

Density conditions

at 20°C

Shelf life from production

24 Month

Max. temperature resistance

80 °C

Min. temperature conditions

-25 °C

Min. temperature resistance

-25 °C

Max. spraying distance

30 cm

Recoatable/Can be painted over

No

Suitable glove:

 
Product
Description
Nitrile chemical protective glove
Nitrile chemical protective glove
Description:
Permeation level: 3
Cotton velour lining
Nitrile chemical protective glove, heavy-duty
Nitrile chemical protective glove, heavy-duty
Description:
Permeation level: 4
Long, heavy-duty design
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.