TRADE CUSTOMERS
CLICK & COLLECT
FAST DELIVERY
CUSTOMER SERVICE +35361430200
OVER 43,000 PRODUCTS
Toggle anchor W-KDW with centring plug
Toggle fixing W-KDW
DWL-(W-KDW)-140-M10X180
Art.-no.
0904710001
EAN 4011231849760
Prices for customers after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +353 61 430200.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 43,000 products
Polyamide collar sleeve and hexagon nut, zinc-plated steel. Specially designed for fastening washbasins, wall-hung toilets etc. to hollow walls or supply shafts. With extra-large contact surface
- Fully pre-assembled
- The toggle anchor locks itself into the base
- The rotatable threaded rod allows each attachment point to be adjusted individually, e.g. when creating a slope
- With large contact surface for soft building materials, even at a low cavity depth of just 90 mm
Product information
Datasheets(X)
Application area
- For fastening washbasins, wall-hung toilets, boilers, load-bearing structures, etc. to hollow walls, service ducts. The centring plug is used to fill the drill hole and to centre the threaded rod.
- Maximum point load on trapezoidal sheet metal ceilings for pipes = 0.8 kN / other fastenings = 1.0 kN
Anchor diameter | 10 mm |
Type description | W-KDW |
Anchor length (l) | 180 mm |
Hole diameter in component (d Bau) | 14 mm |
Design | Rubber spacer, collar and hexagon nut |
Nominal drill-bit diameter (d 0) | 30 mm |
Thread diameter (d thr) | 10 mm |
Max. attachment height (d a) | 140 mm |
Material | Steel |
Minimum cavity depth (h) | 145 mm |
Surface | Zinc plated |
Thread type | Metric thread |