TRADE CUSTOMERS
CLICK & COLLECT
FAST DELIVERY
CUSTOMER SERVICE +35361430200
OVER 43,000 PRODUCTS
Securing sleeve
Fixing sleeve steel zinc plated
DWL-(A0K)-30-8X70
Art.-no.
090508 70
EAN 4011231850230
Prices for customers after login
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +353 61 430200.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 15,000 products
For quick and economic mounting of light attachment parts in all solid materials, galv. steel
- Quick, easy installation
- Hardened spring steel
- Component is held by the collar
- Immediate load-bearing capacity
- For use in push-through installation
- Better thermal properties than polyamide anchors
Application area
Stop bars
Stop bars
Drill hole
Knock in securing sleeve with mason's mallet until flush
Product information
Datasheets(X)
Application area
- For secondary fastening in interior finishing
- Outdoors for secondary attachments that are only required for short periods, e.g. building security
- Can be used in concrete ≥ B25, solid brick, solid sand-lime brick, hard natural stone
Anchor diameter | 8 mm |
Length (l) | 70 mm |
Max. attachment height (d a) (da) | 30 mm |
Embedding depth (h s) | 40 mm |
Nominal drill-bit diameter (d 0) | 8 mm |
Edge clearance (a r) | 50 mm |
Centre-to-centre distance (a) | 80 mm |
Minimum component thickness (d) | 80 mm |
Drill hole depth (t) | 45 mm |
Hole diameter in component (d Bau) | 8.8 mm |
| Anchor diameter [mm] | 6 | 8 | ||
| Performance data | ||||
| Recommended load | Concrete ≥ C20/25 | Frec. [kN] | 0,3 | 0,75 |
| Solid brick | 0,2 | 0,6 | ||
| Solid sand-lime brick | 0,25 | 0,65 | ||
| Characteristic values | |||
| Axis distance | s ≥ [mm] | 240 | 240 |
| Edge distance | c ≥ [mm] | 80 | 80 |
| Drill hole depth | h1 ≥ [mm] | 35 | 45 |
| Setting depth | hnom ≥ [mm] | 30 | 40 |
| Minimum component thickness | hmin ≥ [mm] | 60 | 80 |
| Nominal drill∅ | d0 [mm] | 6 | 8 |
| Through hole in attachment part | df [mm] | 6,8 | 8,8 |
| Sleeve ∅ (untensioned) | [mm] | 6,8 | 8,8 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!