For trade customers only

TRADE CUSTOMERS

CLICK & COLLECT

FAST DELIVERY

CUSTOMER SERVICE +35361430255

OVER 20,000 PRODUCTS

Paint spray, matt

Paint spray nitro-alkydal quality, matt
PNTSPR-R9005-BLACK-MATT-400ML

Art.-no. 0893329005

Prices for customers after login

Paint spray, matt

Art.-no. 0893329005

Prices for customers after login

Quantity

PU

Exclusively for trade customers

Register now and access more than 15,000 products

Durable nitro-alkydal quality at a high technical level

High-grade nitro-alkydal quality


  • Quick-drying

  • High gloss

  • Easy to apply


Can be painted over all common primers, filler products, and paint types



Quick-drying paint resin



Does not contain heavy metals



Drying time at 20°C


  • Dust-dry< 10 min

  • Touch-dry < 20 min

  • Dry to handle < 60 min


Temperature resistant up to +80°C



Storage temperature +15°C to +25°C and up to 60 % rel. humidity



Optimum processing temperature +20°C

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue(X)

Datasheets(X)

Safety data sheet 1

Application area

Broad range of uses


  • Commercial vehicles

  • Bodywork

  • Heaters/radiators

  • Window construction

  • Steel construction etc.
Instructions

Shake can vigorously for approx. 3 minutes before use. The application surface must be clean, dry and free from grease. Remove rust and old loose paint, sand and prime surface. Spraying distance: 20–25 cm. Maintain a flash-off time of approx. 5 minutes between spraying passes.

Contents

400 ml

Colour

Jet black RAL 9005

Chemical basis

Nitroalkydale

Gloss level

Matt

Max. temperature resistance

80 °C

Density

0.75 g/cm³

Dust-drying time

10 min

Min./max. spraying distance

20-25 cm

Min. spraying distance

20 cm

Max. spraying distance

25 cm

Tack-free after

20 min

Shelf life from production

36 Month

Min. processing temperature for can

20 °C

Conditions to maintain shelf life from production

at 15°C to 25°C and max. 60% relative humidity

Conditions for drying time

at 20°C

Min. flash-off time

5 min

Version

Round nozzle

Free from heavy metals

Yes

CFC (fuel gas) free

Yes

Suitable glove:

 
Product
Description
Butyl chemical protective glove
Butyl chemical protective glove
Description:
Permeation level: 2
Gas-tight and resistant to exhaust gases produced by combustion processes
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.