Welcome to Würth Ireland & Northern Ireland For trade customers only

TRADE CUSTOMERS

CLICK & COLLECT

FAST DELIVERY

CUSTOMER SERVICE +35361430200

OVER 43,000 PRODUCTS

PRESSURE SPRAYER KNAPSACK

Backpack sprayer FAITHFULL
RUECKSPZ-FAITHFULL-16LTR

Art.-no. 9501016845
EAN 4099618341229

Prices for customers after login

Show availability in Würth shop
Exclusively for trade customers

Register now and access more than 43,000 products

16-liter capacity pressure sprayer made from durable, shatterproof, and frost-resistant material, equipped with a pressure release safety valve



  • The spray lance features an adjustable nozzle and a trigger lock for continuous use when needed

  • The 16L easy-carry knapsack sprayer features a "pump-as-you-go" pressure system, making large spraying tasks effortless

  • The large capacity of this sprayer makes it perfect for use in bigger gardens
Notice
  • When using garden pesticides, herbicides, insecticides, fungicides or any other form of garden chemical always obey the manufacturers instructions fully

  • Avoid contact with the skin and eyes, do not eat, drink or smoke when using the sprayer

  • Do not use garden sprayers for the application of flammable liquids

  • Wear the appropriate protective equipment coverall, gloves, goggles and suitable respiratory mask

  • Always direct the spray downwind as spraying into the wind will result in operator contamination


This information is only a recommendation based on our experience. Preliminary testing required!

Blocked Nozzles

If a nozzle becomes blocked or fails to spray the correct pattern, unscrew the nozzle tip and clean the components under running water or a water jet. Do not use a metallic instrument to unblock a nozzle as this may alter the nozzle aperture making the nozzle ineffective



Cleaning


Add a little detergent and some warm water (not hot) to the sprayer and spray through the system. Repeat the above operation with clean cold water. Finally check that the nozzle is free from any residue. Your sprayer will now be perfectly clean and ready for its next use. Always dispose of any unused garden chemicals safely and in accordance with the manufactures instructions



After use


Always release the pressure from the pump cylinder before storage. Hold or lock the sprayers trigger in the on position until the pressure in the pump has been released



Storage


Store the sprayer under cover and avoid freezing temperatures. For winter storage ensure that all fluid is removed from the tank, hose and lance before storing. Do not store in direct sunlight, in a


greenhouse or any areas where extremes of heat may occur

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

This sprayer is designed for the application of water based domestic garden and agricultural chemicals, disinfectants and cleaning agents. Do not use to spray caustic or corrosive solutions or use with spirit based products as this may affect the pumps seals

Instructions
  • Before filling always check that the sprayer’s shoulder straps are correctly fitted and adjusted so that the sprayer sits comfortably on your back

  • Unscrew the large filler opening cap but do not remove the internal plastic filter

  • Fill the sprayer to the desired level ensuring you do not exceed the maximum fill mark

  • Replace the cap and screw down firmly

  • Operate the pump handle 8 - 10 times to draw liquid into the pump pressure chamber and to provide the required working pressure

  • To commence spraying depress the trigger handle until the desired flow rate is achieved. The trigger is fitted with a handy lock so that it may be locked in the on position for prolonged spraying operations

  • Continue operating the pump handle using a steady motion to maintain pressure in the sprayer pump whilst spraying

  • Spray nozzles may be adjusted by twisting until the required spray pattern is obtained (from a mist through to a coarse jet). Additional nozzles are supplied to provide different spray patterns, depending on the type of work being carried out. Do not undo nozzles too far as this will cause them to leak from the rear

  • If the nozzle continues to drip after the trigger handle has been shut off, there is probably air in the discharge system (nozzle, handle, tap and hose). Purge the system by turning the nozzle to jet and operating the trigger on and off in short bursts, until the liquid shuts off cleanly. Collect any liquid in a separate container to use later

Bin capacity

16 l

Flow capacity conditions

at 2 bar

Flow capacity

0.2 GPM

Max. operating temperature

30 °C

Material

Plastic impact-resistant

Height x width

58 x 20 cm

Hose length

140 cm

Product weight (per item)

3.140 kg

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information