Welcome to Würth Ireland & Northern Ireland For trade customers only

TRADE CUSTOMERS

CLICK & COLLECT

FAST DELIVERY

CUSTOMER SERVICE +35361430255

OVER 20,000 PRODUCTS

Diesel particulate filter cleaner

Diesel particulate filter cleaner
CLNR-PARTCLFILT-400ML

Art.-no. 5861014500

Prices for customers after login

Diesel particulate filter cleaner

Art.-no. 5861014500

Prices for customers after login

Quantity

PU

Exclusively for trade customers

Register now and access more than 15,000 products

Cleaner for removing carbon and ash deposits from diesel particulate filters

Loosens and removes carbon deposits in the particulate filter



DPF can be cleaned without needing to remove it


Cuts costs, as a new particulate filter does not need to be fitted (depends on the condition of the particulate filter)



Non-flammable



Neutral, ash- and metal-free recipe



Residue-free evaporation

Notice

This information is intended to advise you, to the best of our knowledge, based on our tests and experience. Preliminary testing required! For more information, please refer to the technical data sheet.

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue(X)

Catalogue page as PDF 1  |  2  |  3  |  4

Datasheets(X)

Safety data sheet 1

Application area
  • Remove the temperature or pressure sensor

  • Insert the probe into the hole created and spray in the direction of the particulate filter to empty

  • Recovery then needs to be initiated manually via the tester or by taking a test drive

  • Interrogate the fault memory following recovery and delete any errors if necessary. One can is sufficient for one particulate filter
Instructions

The diesel particulate filter cleaner is used to rectify performance losses or faults that are exacerbated by dirty diesel particulate filters. The full absorption capacity is restored by cleaning the filter.

Contents

400 ml

Colour

Rosy

Smell/fragrance

Aminic

Chemical basis

Water

Shelf life from production

15 Month

Density

1.01 g/cm³

Density conditions

at 20°C

pH value

11.47